function of cyclone separator is a kind of monomer dust removal equipment with automatic ash cleaning structure. This dust collector is widely used in cement, mineral powder, mining, metallurgy, building materials, machinery, chemical industry, grain processing and other industrial and mining enterprises.

function of cyclone separator is a small volume, dust removal efficiency is good air purification equipment. Suitable for various independent dust production points, flexible and convenient, local dust collection, local treatment, can determine the cleanliness of the air.

The basic structure is composed of dust removal box, centrifugal fan, filter bag (filter cartridge), dust collector and microcomputer controller, etc. The dust is sucked inside the dust collector box by the negative pressure of the fan through the dust suction pipe, and the coarse particle dust is filtered by the filter and directly reduced to the dust collector. The particulate dust is captured by the filter on the outer surface, and the clean gas flows into the clean room after being filtered, decomposed and purified by the filter element of the filter, and then discharged from the outlet by the fan. The whole process of dust removal and filtration is the result of comprehensive effects such as gravity, inertial force, collision, electrostatic adsorption and screening.

function of cyclone separator is composed of three parts: fan, filter and dust collector. Each part is installed in a vertical frame, steel shell, baking paint and rust prevention, stable operation and easy to use. function of cyclone separator The centrifugal fan is adopted, with large air volume, high wind pressure and noise reduction measures. The filter adopts flat cloth bag group, each cloth bag is equipped with spring steel wire mesh, the filtering effect is good. The flyaway mechanism uses the motor to drive the eccentric wheel and the connecting rod to make the cloth bag shake and stick to the dust on the surface of the filter bag. The function of cyclone separator is provided with access door for convenient maintenance and bag changing.

function of cyclone separator Preparation and operation precautions before use:

1, function of cyclone separator before use: check dust collector and flue, dust collector and ash hopper, ash hopper and ash discharging device, ash conveying device and other joint air tightness, ash leakage, gas leakage phenomenon. Turn down the baffle valve, start the fan, and gradually open the baffle valve after no abnormal phenomenon, so that the dust collector can pass the specified amount of dust containing gas.

2, function of cyclone separator during operation of the technical requirements: pay attention to the easy wear parts such as the inner wall of the outer cylinder changes, pressure difference changes and exhaust smoke status. When the temperature of dusty gas changes or the humidity decreases, pay attention to the adhesion, blockage and corrosion of dust. The air tightness of each part of the dust collector is checked for changes in the gas flow rate and dust collection concentration of the cylinder.

function of cyclone separator The main job is to clean up a lot of dust, but sometimes some dust is very difficult to clean up. function of cyclone separator is for cement plant warehouse top, warehouse bottom. Designed for belt conveyor and local dust source dust removal. It can also be used for local dust source dust removal in other industries. It has the advantages of small volume, large air volume, compact structure, easy to use and stable.

function of cyclone separator When using, adhere to "first open dust removal equipment, then open production equipment; Stop the production equipment first, then stop the dust removal equipment "operation procedure; Adhere to the principle of synchronous operation and maintenance of dust removal equipment and main process equipment. The operation procedures of dust removal equipment shall include: general principles, equipment composition, main technical indicators, operation points, operation inspection, major fault handling plans and operation records. The working principle and structural characteristics of dust removal equipment are different, and the operation procedures of dust removal equipment are also different.

function of cyclone separator https://www.kaisenfilter.com/What-is-the-function-of-cyclone-separator.html