Clamp-On Flow Meter - Condensation

The clamp-on ultrasonic flow meter is well known for its one-of-a-kind non-invasive installation method, which enables non-intrusive flow measurement for closed pipes. There are a few different names for clamp on flow meters, including clamp on water flow meter, strap on flow meter, non contact flow meter, and others. It is able to measure the volume of liquid that is flowing from the pipe's exterior surface. Doppler and transit-time are the two primary types of ultrasonic principles that are utilized in the development of flow meters. A typical application for a transit-time flow meter would be to measure clear liquids, liquids with average bubbles or particles, such as water, as well as fuel, alcohol, and other beverages. The clamp-on ultrasonic flowmeters  is primarily used for measuring contaminated fluids.

Strap On Flow Meter Characteristics and Uses

Strap-on flow meters offer non-contact flow measurement, which means that the flow meter does not need to stop flow or cut the pipe in order to perform the measurement. This is a one-of-a-kind flow meter that cannot be compared to any others. Many clients do not harbor any hopes of being able to influence the normal production schedule during the installation process or during future management. The non contact flow meter does not come into direct contact with the fluid, thereby preventing a secondary medium from becoming polluted. The strap-on feature not only makes it simple and convenient to install and operate, but it also lowers the cost of installing it as well as the cost of the materials. Because there is no pipe cutting, there is no possibility of leakage, and almost no cost will be incurred in the future for maintenance. Because it does not contain any moving parts, a strap-on flow meter does not experience any pressure loss. Additionally, users do not require any replacement parts, and the device's good performance can be maintained for an extended period of time.

Principal Characteristics:

Pipe size ranges from DN25mm to 4500mm. Velocity ranges from 0-12m/s in both directions.

RS485, relay, OCT pulse, 4-20mA, 0-20mA, and frequency are the outputs.

Modbus, Hart, and M-bus are the communication protocols.

The fluid can reach temperatures up to 155 degrees Celsius.

Solar, 100-250 volts ac, and 9-36 volts dc are the sources of power.

Working current is 50 milliamperes

Data logger: built-in data logger.8G data logger optional

Flow sensors fall under this category of protection. Flow converter with an IP65 rating. You have the option of ordering IP67 or IP68.

Language: English/Italian

Kit for Non-Contact Flow Meters Non-contact flow meters typically consist of three components: a converter, a clamp transducer (also known as a flow sensor), and a special cable.

Converter is electronic processor,clamp on transducer sensor detects liquid signal. Cable is used to send the liquid signal to the converter. The system now makes use of digital signal processing, also known as DSP. At a minimum, these three components are needed for a non-contact flow meter to be considered complete.

You are going to need to place an order for at least one electronic converter and one set of flow sensors in order to get an accurate reading from an ultrasonic flow meter.

Ultrasonic Flow Measuring Device at a Low Cost

The first thing that comes to many people's minds when you mention a clamp-on ultrasonic flow meter is that it is prohibitively expensive. In reality, however, this is an outdated memory. We were able to bring it down to a very affordable price thanks to the hard work of our knowledgeable RD team. In the past, clamp on flow meters were almost always extremely pricey, and only projects with extensive budgets could afford to purchase one. Now, as a result of the low cost and good performance, an increasing number of customers prefer to choose our clamp on flow meter as their priority option. For the application at this time, pipe cutting is not permitted, so the clamp-on ultrasonic flowmeters  is virtually the only solution available. Our ultrasonic flow meters have been very successful in the global market thanks to the high cost-effectiveness of the solutions they provide.

Discover a Genuine and Experienced OEM Manufacturer ABEST have been involved with ultrasonic flow meters for decades of years and have accumulated strong power in the developing and manufacturing processes.

Clamp-on ultrasonic flow meters have historically been extremely pricey, and even though their price has since decreased, it is still quite pricey when purchased from other manufacturers. Our knowledgeable research and development team has been successful in bringing the price of clamp-on flow measurement down significantly, which will allow a greater number of people to benefit from the technology. If you are interested in clamp-on flow meters that offer a solution that is both cost-effective and convenient, please do not hesitate to get in touch with us.

In addition to standard models, we are able to provide complete OEM customization services, covering everything from hardware to software. This service can boost your brand's reputation while also protecting your market share from potential competitors. Our clamp on ultrasonic flow meters have garnered a strong reputation with customers from all over the world thanks to our expertise as a manufacturer.